- You can choose waterproof or not waterproof machine. 1. Atomized water quality and adaptable, the same nebulizer use pure water or tap water can work. 2. The power for a wide range of products to ensure that the changes in the city still under normal use larger occasions.
- 3. With power supply polarity protection circuit prevents damage to the product user interface instead (reverse does not work). 4. There boot delay circuit, to avoid a power surge current excessive damage to the line.
- 5. A single sprinkler line using an independent design, and the use of over-current protection circuit, avoiding the burning of a nozzle damaged power lines, and does not affect the normal operation of other jets.
- 6. The machine current voltage and temperature by less influence, because each nozzle current electronic automatic adjustment, the current increasing temperature will decrease (does not affect the amount of fog), to avoid serious power tube heat current increasing the vicious cycle and damage the atomizer.
- 7. This product uses high thermal conductivity, high corrosion resistance, good mechanical strength of the metal shell, reducing the temperature difference between the water inside the host, thereby prolonging the life of the product.
Note: One kind of the machines is waterproof with 220V only, The other kind of the machines is not waterproof but 110v/220v is selected by switch before power on) Parameter:
1.Power supply: 220V
2.Working Voltage: DC48V
3.Working Current: 4.8A-5A
4.Power: 360W
5.Output power:250W
6.Spray volume: 3500- 5000ML / H
7.Cooling model :Air-cooled
8.Shell Material: 304 stainless steel shell, shell polished surface treatment
Package Included: 1 x 10 head Ultrasonic mist maker
1 x transformer with 1.5m power line
(Waterproof transformer Only for 220V）
1. When the atomizer work, please do not put your hand over the top of the atomizer spray chamber to prevent ultrasonic wounded.
2. Nebulizer must be working in the water in order, before using the water and then put it in its power, and to ensure that there is water in a spray film surface state, in order to avoid damage to the nebulizer.
3. When you stop using the nebulizer before disconnect the power, then remove from the water atomizer.
4. When using the nebulizer, please use the output power of more than 250W, the output voltage is DC45 ± 5V supply.
